Текст страницы
WDS
Displays the status of the WDS (Wireless Distribution System) function.
WDS is a communication system among multiple wireless networks . It is
established between APs through wireless connection. WDS is used during
the connection process between the device and the root AP.
Enable: Forward data frames using four address fields.
Disable: Forward data frames using three address fields.
Auto: The device automatically negotiates the wireless data frame structure
(three or four address fields) with the root AP. The selection of Auto is
recommended.
Root AP BSSID
Displays the BSSID (Basic Service Set ID) of the root AP. BSSID is used to
identify a BSS. Each BSS has its own BSSID. The BSSID is decided by the
manufacturers, and it is usually related to the device’s MAC address.
Root AP SSID
Displays the wireless network name of the root AP.
TX Rate
Displays the data rate of the device during the sending of the wireless
packets.
RX Rate
Displays the data rate of the device during the receiving of the wireless
packets.
Displays the amount of time the device has been connected to the root AP.
Connection
Time
3.5 View the LAN Settings
Go to the STATUS page. In the LAN section, view the LAN information of the device. To
configure the LAN settings, refer to 4. Configure the Network.
MAC Address
Displays the LAN port MAC address of the device.
IP Address
Displays the LAN port IP address of the device.
Subnet Mask
Displays the subnet mask of the LAN.
48