Текст страницы
6.8 Configure RSSI LED Thresholds
Note:
RSSI LED Thresholds is only available on certain devices. To check whether your device
supports this feature, refer to the actual web interface.
Configure the LEDs on the device to light up when received signal levels reach the values
defined in the following fields. This function can help a technician to easily deploy a Pharos
series product without logging into the device (for example, for antenna alignment operation).
1. Go to the Management page. In the RSSI LED Thresholds section, configure the
following parameters and click Apply.
Displays the LED number.
LED1/LED2/
LED3/LED4
Thresholds
Specify the threshold for the desired LED. The specified LED will light up
if the signal strength reaches the values in the field. The default values
are set according to the verified optimum values. We recommend you
keep it by default.
The default LED threshold values may vary among different product
models in terms of radio features.
2. Click Apply, then click Save.
120