Текст страницы
MAXtream
Station Mode
Note:
MAXtream is only available on certain devices. To check whether your
device supports this feature, refer to the actual web interface.
MAXtream Station Mode is available in Client Mode, Bridge Mode and AP
Client Router Mode with the wireless AP settings disabled.
Auto Adjust: The device will choose the MAXtream Station Mode
automatically.
Latency First: Set the MAXtream Station Mode as Latency First and the
time sensitive stream such as VoIP will take precedence in MAXtream
system.
Throughput First: Set the MAXtream Station Mode as Throughput First
and the stream that needs high throughput such as online games will take
precedence in MAXtream system.
5.2 Configure Wireless Client Parameters
Note:
Wireless Client Settings submenu is only available in Client, Repeater, Bridge and AP
Client Router (WISP Client) Mode.
In this section, configure wireless client parameters used for the connection with the root
AP.
1. Go to the Wireless Page. In the Wireless Client Settings section, configure the
following parameters.
SSID of AP
Specify the SSID of the root AP. You can enter the SSID of the specific
AP manually, or directly survey all the APs around by clicking Survey and
select one.
MAC of AP
Displays the MAC address of the root AP. It’s possible that two or more
networks use the same SSID in the AP list. Enable Lock to AP to select
SSID and AP simultaneously, which can make the device connect to the
specific AP you had connected before the next time.
94