Текст страницы
5.1 Configure Basic Wireless Parameters
This section allows you to configure wireless basic parameters, such as 802.11 mode,
Transmit Power, and data rates.
Go to the Wireless Page. In the Basic Wireless Settings section, configure the basic
wireless settings and click Apply. Then click Save.
Region
Specify the region where you use the device. Available channels and
maximum Transmit Power will be determined by the selected region
according to the local laws and regulations.
Mode
Select the protocol standard used in the wireless network. To check what
protocol standards your device supports, refer to the actual web interface.
Certain devices have a frequency band of 2.4GHz, supporting 802.11b,
802.11g, 802.11n, 802.11b/g, and 802.11b/g/n modes. We recommend
that you set the mode as 802.11b/g/n, allowing all 802.11b, 802.11g and
802.11n wireless stations to access the device.
Certain devices have a frequency band of 5GHz, supporting 802.11a,
802.11n, and 802.11a/n modes. We recommend that you set the mode as
802.11a/n, allowing both 802.11a and 802.11n wireless stations to access
the device.
Certain devices have a frequency band of 5GHz, supporting 802.11ac,
802.11n/ac, and 802.11a/n/ac modes. We recommend that you set the
mode as 802.11a/n/ac, allowing all 802.11a, 802.11n, and 802.11ac wireless
stations to access the device.
91