Текст страницы
2. Click the Setting button to specify the Auto Mail Settings.
From
Enter the sender’s E-mail address.
To
Enter the receiver’s E-mail address.
SMTP Server
Enter the IP address of the sender’s SMTP server.
Authentication
Enable or disable the authentication function. If the sender’s mailbox is
configured, check the box to enable mail server authentication. Enter the
sender’s username and password.
Auto Mail
Feature
Enable or disable Auto Mail Feature. With this feature enabled, specify
the way for the device to send the system log.
6.2 Specify the Miscellaneous Parameters
This section is used to specify miscellaneous parameters.
1. Go to the Management Page. In the Miscellaneous section, configure the following
features and click Apply.
113