Текст страницы
SSID
Select te SSID to which the filtering rules apply. In AP Mode, if Multi-SSID
is enabled, you should set different filtering rules for each SSID.
MAC
Enter the MAC address of the wireless host that you need to filter.
Comment
Enter the description information for the filtering rule
3. Click Save and click Apply. Then click Save.
5.6 Configure Advanced Wireless Parameters
This section is used to specify the advanced wireless parameters, such as Beacon Interval,
RTS threshold and DTIM Interval.
Go to the Wireless page. In the Advanced Wireless Settings section, specify the following
parameters and click Apply. Then click Save.
Distance
Setting
Specify the distance between AP and Station. If this device serves as a
client, the value is the distance between this device and the root AP. If this
device serves as an AP, the value is the distance between the farthest client
and this AP.
You can manually enter the value or enable the Auto option.
Manual: Enter the distance manually in the input box. The value is limited
to 0-200km, and we recommend you set the value to 110% of the real
distance.
Auto (Only works within 0-xx km): Check the Auto option, then the system
will dynamically detect the distance. This function is available only when
the distance is less than xx kilometers. The value xx varies according to the
channel width you set. CPE210 does not support this option.
The distance value will be converted to a corresponding ACK timeout value,
and the ACK timeout value will influence the throughput performance to a
large extent.
108