Текст страницы
• AP Status.
AP
Displays the status of the wireless AP function. With this enabled, the
device can provide a wireless network for the clients. By default, it is
enabled in Access Point, Repeater, Bridge, AP Router and AP Client Router
Modes and disabled in Client Mode.
MAC Address
Displays the MAC address of the wireless interface connected to the
clients.
SSID
Displays the wireless network name (SSID) created by the device.
Security Mode
Note:
WEP is only available on certain devices. To check whether your device
supports this feature, refer to the actual web interface.
Displays the security mode you’ve selected for your wireless network.
There are three security modes: WPA-PSK, WPA and WEP. None means
that no security mode is selected and all the hosts are allowed to access
the wireless network directly. The security mode which is set on the clients
should be the same as that on this device.
Displays the number of the connected stations.
Connected
Stations
• Client Status.
Client
Displays the status of the wireless client function. With this function
enabled, the device can connect to the root AP through wireless
connection. By default, it is enabled in Client, Repeater, Bridge and AP Client
Router Modes and disabled in Access Point and AP Router Modes.
MAC Address
Displays the MAC address of the wireless interface connected to the root
AP.
Security Mode
Note:
WEP is only available on certain devices. To check whether your device
supports this feature, refer to the actual web interface.
Displays the security mode you’ve selected for your wireless network.
There are three security modes: WPA-PSK, WPA and WEP. None means
that no security mode is selected and all the hosts are allowed to access
the wireless network directly. The security mode which is set on the device
should be the same as that on the root AP.
47