Текст страницы
1. Go to the Network page. In the Bandwidth Control section, enable the Bandwidth
Control function.
Total Ingress
Bandwidth
Specify the upper bandwidth for receiving packets from the WAN port.
The maximum value is 100,000kbps.
Total Egress
Bandwidth
Specify the upper bandwidth for sending packets from the WAN port.
The maximum value is 100,000kbps.
2. Click Add and specify the following parameters.
Enable
Enable or disable the desired entry.
IP Range
Enter the IP Range of the target hosts which need to be controlled of
bandwidth, for example 192.168.0.12-192.168.0.25.
Port Range
Enter the Port Range through which the target hosts visit external server,
for example 1-63258.
Protocol
Choose one of the protocols used for this application: TCP, UDP, or TCP/
UDP.
Specify the minimum ingress bandwidth for the desired entry.
Ingress Min
(kbps)
Specify the maximum ingress bandwidth for the desired entry.
Ingress Max
(kbps)
Specify the minimum egress bandwidth for the desired entry.
Egress Min
(kbps)
87