Текст страницы
Parameter description
Parameter
Description
Failover
Used to enable or disable the failover function.
Specifies how your router connects to the internet, including:
−
PPPoE: Select this type if you access the internet using the PPPoE user name and
PPPoE password.
Connection Type
−
Dynamic IP Address: Select this type if you can access the internet by simply
plugging in an Ethernet cable.
−
Static IP Address: Select this type if you want to access the internet using fixed IP
information.
PPPoE Username
When PPPoE is chosen as the connection type, you need to enter the user name and
password provided by your ISP to access the internet.
PPPoE Password
Specifies the obtaining method of WAN port DNS address, which is Automatic by
default.
DNS Settings
−
Automatic: The router obtains a DNS server address from the DHCP server of the
upstream network automatically.
−
Manual: The DNS server address is configured manually.
VLAN ID
Used to enable or disable the VLAN ID according to the actual network environments.
When the function is enabled, the VLAN ID is required to enter. Consult your ISP for
this parameter. The value range is 1 to 4094.
5.2.2 Access the internet through dynamic IP address
Generally, accessing the internet through dynamic IP address is applicable in the following
situations:
−
Your ISP does not provide PPPoE user name and password, or any information including IP
address, subnet mask, default gateway and DNS server.
−
You have a router with internet access and want to add a 4G08 as the other one.
The application scenario is shown below.
34
Document Version: V1.0