Текст страницы
−
If there are more than two secondary nodes, place the primary node in the key area and ensure that
no more than one node is between the primary node and the secondary node.
−
Before using a new router to extend the network, ensure that the existing router (primary node) has
been connected to the internet and the new router (secondary node) is restored to the factory
settings.
−
The router can be networked with other routers that support the XMESH protocol. If the router fails to
be added to an existing network, contact Tenda customer service for help. The following uses 4G08
(primary mode) and MX15 (secondary node) as an example.
7.2.1 MESH button networking
Procedure:
1. Add to the existed network.
1) Power on the existing router (4G08) and connect it to the internet properly.
2) Place the new router (MX15) near the existing router (within 5 meters) and power on.
Wait until the startup of the new router is complete. The indicator blinks green slowly.
3) Press (1 to 3 seconds) the networking button (MESH) of the new router. The indicator
blinks green fast.
4) Press (1 to 3 seconds) the networking button (MESH/RST) on the existing router.
When the indicator of the new router turns solid green, the networking is successful.
The MX15 becomes a secondary node in the network.
2. Select an appropriate position for the new router.
1) For a better internet experience, you can relocate the wireless router by referring to the
following relocation tips:
−
Place the new router within the wireless coverage range of the existing router.
−
Keep your nodes away from electronics with strong interference, such as microwave
ovens, induction cookers, and refrigerators.
−
Place the nodes in a high position with few obstacles.
2) Power on the new router, and wait until the indicator blinks green slowly.
−
The indicators of the new router may vary with device models. Please refer to the product you
purchased.
−
If the indicator of the new router is still blink green slowly after 3 minutes. Please adjust the new
router closer to the existing router.
59
Document Version: V1.0