Текст страницы
On the Mesh page, you can view and configure the added node.
To access the internet with:
‒
Wired devices: Connect to a LAN port of the router using an Ethernet cable.
‒
WiFi-enabled devices: Connect to the Wi-Fi network using the Wi-Fi name and password
you set.
−
After the wired networking is successful, if the Ethernet cable connecting the two routers are removed,
the system automatically switches to the wireless networking. To obtain better internet access
experience after switching to a Wi-Fi network, go to select an appropriate position for the new router.
−
If there is still a router to network, repeat this section.
7.2.3 Scanning networking
After you fail to add the node to the Mesh network using the Mesh button networking or wired
networking, you can manually add other routers to the network of the existing router through the
scanning networking.
Procedure:
1. Log in to the web UI of the router, and navigate to Mesh.
- Click Manually add on the Add Node page.
- The system discovers new nodes, ensure that the MAC address is the same as the MAC
address on the label of the new router, select a node, and click Add.
61
Document Version: V1.0