Текст страницы
Observe the indicator of the new router until it changes to one of the following status:
Solid green
Networking succeeds. Excellent connection quality.
Solid yellow
Networking succeeds. Fair connection quality.
Solid red
Networking succeeds. Poor connection quality.
3) If the indicator of the new router is solid red, select a new location by referring to substep
1 of step 2 in this section to obtain the better connection quality.
---End
To access the internet with:
‒
Wired devices: Connect to a LAN port of the router using an Ethernet cable.
‒
WiFi-enabled devices: Connect to the Wi-Fi network using the Wi-Fi name and password
you set.
Repeat this section to add other routers.
7.2.2 Wired networking
Assume that the Ethernet cable has been deployed in advance between the living room and the
bedroom in the home, the existing router 4G08 (primary node) placed in the living room has been
connected to the internet, and now you need to deploy a new router MX15 (planned as a
secondary node) in the bedroom to extend the Wi-Fi network.
Procedure:
1. Power on the existing router (4G08) and connect it to the internet properly.
2. Place the new router (MX15) where you want to deploy it, which is bedroom in this example.
Power on the new router. Wait until the startup of the new router is complete (the indicator
blinks green slowly).
3. Connect the LAN port (LAN, WAN/LAN) of the existing router to the LAN port of the new
router using an Ethernet cable.
---End
The wireless router will automatically network. Please wait about 1 minute. When the indicator of
the new router turns solid green, the networking is successful. The MX15 becomes a
secondary node in the network.
60
Document Version: V1.0