Инструкция точка доступа TP-Link CPE605

In this section, configure wireless AP parameters used for the connection with the clients.

1. Go to the Wireless Page. In the Wireless AP Settings section, specify the SSID.

Enable SSID
Broadcast

Enable or disable SSID broadcast. With this function enabled, the device
will broadcast the SSID periodically.

2. Specify the security mode used for the clients to access the wireless network.

■None

Select None when you want an open network without wireless security. In this mode, network

data is not encrypted, but you can still authenticate clients by enabling the RADIUS MAC

Authentication function.

Note:

RADIUS MAC Authentication is only available on certain devices. To check
whether your device supports this feature, refer to the actual web interface.

99