Текст страницы
Version
Select the version of WPA.
Auto: The device will automatically choose the version used by the root
AP.
WPA/WPA2: They’re two versions of WPA security mode. WPA2 is an
update of WPA. Compared with WPA, WPA2 introduces AES algorithm
and CCMP encryption. Theoretically, WPA2 is securer than WPA.
Encryption
Note:
TKIP is only available on certain devices. To check whether your device
supports this feature, refer to the actual web interface.
Select the Encryption type.
Auto: The default setting is Auto and the device will select TKIP or AES
automatically according to the wireless network of root AP.
TKIP: Temporal Key Integrity Protocol. TKIP is not supported in 802.11n
mode, 802.11ac mode or 802.11n/ac mixed mode. If TKIP is applied
in 802.11n, 802.11 ac or 802.11n/ac mixed mode, the device may not
be able to access the root wireless network. If TKIP is applied in 11b/
g/n mode (2.4GHz) or 11a/n mode(5GHz), the device may work at a low
transmission rate.
AES: Advanced Encryption Standard. It is securer than TKIP.
Authentication
Select the type of the authentication.
Phase 2 Auth
Select the type of Phase 2 Auth. The device only supports MSCHAPV2
currently.
Specify the WPA User Name used in the connection with the root AP.
WPA User
Name
WPA User
Password
Specify the WPA User Password used in the connection with the root
AP.
■WPA-PSK
WPA-PSK (Wi-Fi Protected Access-PSK) is based on a pre-shared key. It is characterized by high
safety and simple settings, so it is mostly used by common households and small businesses.
97