Текст страницы
Channel
Shifting
Note:
Channel Shifting is only available on certain devices. To check whether
your device supports this feature, refer to the actual web interface.
Enable or disable the Channel Shifting function. This function is only
available when MAXtream is enabled in Access Point Mode and AP Router
Mode. Channel Shifting is a TP-Link proprietary technology. With Channel
Shifting enabled, the AP will use non-standard channels by adding a
frequency offset to the standard 802.11 b/g/n channels.
Your network can then only be detected by the wireless devices with
Channel Shifting enabled and so is less likely to be detected by other
wireless networks, which benefits network security.
Transmit Power
Note:
In most scenarios, it is unnecessary to select the maximum transmit power.
Selecting larger transmit power than your need may cause interference
to neighborhood. Also it consumes more power and will reduce longevity
of the device. Select appropriate transmit power to achieve the best
performance. Use the Speed Test tool to find the best performance.
Specify the transmit power of the device. Use the slider or manually
enter the transmit power value. For Outdoor Wireless Base Stations, the
maximum transmit power varies according to the antenna gain value.
MAXtream
Note:
• MAXtream is only available on certain devices. To check whether your
device supports this feature, refer to the actual web interface.
• MAXtream Technology is only compatible with Pharos series products.
Working with products from other manufacturer will cause network fault.
Enable or disable the MAXtream function. This function is only available
in Access Point Mode and AP Router Mode. MAXtream is a TP-Link
proprietary technology. It is based on TDMA (Time Division Multiple Access)
so that data streams are transmitted in their own time slots. MAXtream aims
to maximize throughput and minimize latency. “Hidden nodes” problem can
also be eliminated with MAXtream enabled.
93