Текст страницы
WDS
Displays the status of the WDS (Wireless distribution System) function.
WDS is a communication system among multiple wireless networks . It is
established between APs through wireless connection. WDS is used to
during the connection between the device and the root AP.
Enable: Forward data frames to use four address fields.
Disable: Forward data frames to use three address fields.
Auto: The device automatically negotiates the wireless data frame
structure (three or four address fields) with the root AP. The selection of
Auto is recommended.
2. Specify the security mode. Make sure the security mode and the related parameters
are the same as the upstream wireless network’s.
■None
Select this option if the root AP has no encryption. When connecting to the root AP, it’s no need
to enter a password to access the wireless network.
■WEP
Note:
• WEP is only available on certain devices. To check whether your device
supports this feature, refer to the actual web interface.
• WEP is not supported in 802.11n mode or 802.11ac mode. If WEP is applied in
802.11n, 802.11 ac or 802.11n/ac mixed mode, the clients may not be able to
access the wireless network. If WEP is applied in 802.11b/g/n mode (2.4GHz)
or 802.11a/n (5GHz), the device may work at a low transmission rate.
WEP (Wired Equivalent Privacy) is a traditional encryption method. It has been proved that WEP
has security flaws and can easily be cracked, so WEP is rarely used in normal wireless network.
Select this option if the security mode of the root AP is WEP.
95