Текст страницы
Get Familiar
• Touch Connected devices to view the connected devices list and blocklist. Touch a
device in the Connected devices list to move it to the Blocklist list as prompted. You can
also remove a device from the list.
• If you are sharing a mobile data network, you can also touch More to set AP band.
Share Your Network via Bluetooth
1
Go to Settings > Bluetooth, and enable Bluetooth. Select a device, then follow the
onscreen instructions to complete pairing.
2 Go to Settings > Mobile network > Personal hotspot > More, and enable Bluetooth
tethering.
3 On the Bluetooth settings screen of the paired device, touch next to the name of your device, then enable Internet access to share your network.
Share Your Network via USB
1 Use a USB cable to connect your phone to your computer.
2 On your phone, go to Settings > Mobile network > Personal hotspot > More, and
enable USB tethering to share your mobile data or the currently connected Wi-Fi
network.
Connect to Mobile Data
1 Make sure that mobile data is available on your SIM card.
2 Connect to mobile data using either of the following methods:
•
Swipe down from the top right of the screen to open the Control Center. Turn on
Mobile data.
•
Go to Settings > Mobile network > Mobile data, and enable Mobile data.
To save battery power and mobile data, disable the mobile data service when you don't
need it.
Use VoLTE to Make HD Video Calls
VoLTE (Voice over LTE) is an IP-based data transmission technology. After enabling VoLTE,
it can provide you with fast call connection times and high-quality voice and video calls.
Enable VoLTE
Contact your carrier to activate the VoLTE service for your SIM card. If both the primary and
secondary SIM card trays of a dual-SIM phone support VoLTE, it can be enabled for both
SIM cards.
•
This feature may vary depending on your carrier.
•
5G services are only available in some countries and regions.
•
Enable 5G if the 5G network is supported. The VoLTE feature will then be enabled by default.
9