Инструкция точка доступа Tenda i24

7.5 Diagnostic tool

7.5.1 Overview

The AP supports Ping command, which is used to check whether or not the connection between the
AP and a specified host is correct and the connection quality when facing network reachability
issues.

7.5.2 Executing Ping command to detect connection quality

Assume that you need to check the connection quality between the AP and its upstream router:

Step 1 Choose Tools > Diagnostic Tool to enter the configuration page.

Step 2 Enter the IP address of its upstream router in the Target IP/Domain Name box, which is

192.168.1.1 in this example.

Step 3 Click ping, or press Enter (Windows) or Return (Mac) on keyboard.

---- End

Wait a moment. The Ping result is displayed in the black square. See the following figure:

95