Текст страницы
5.8 QVLAN settings
This AP supports the IEEE 802.1q VLAN function and can work with switches supporting that
function to establish multiple VLANs. Devices connecting to VLANs with different VLAN IDs cannot
communicate with each other. By default, the AP’s QVLAN function is disabled.
5.8.1 Overview
To enter the configuration page, choose Wireless > QVLAN Settings.
Parameter description
Parameter
Description
QVLAN
It specifies whether to enable the QVLAN function of the AP. By default, it is disabled.
Port-based VLAN ID.
PVID
It specifies the ID of the default native VLAN of the trunk port of the AP. The default
value is 1.
It specifies the ID of the AP management VLAN. The default value is 1.
Management VLAN
After changing the management VLAN, you can manage the AP only after connecting
your computer or AP controller to the new management VLAN.
2.4 GHz SSID
It specifies the currently enabled SSID(s) over the 2.4 GHz band of the AP.
5 GHz SSID
It specifies the currently enabled SSID(s) over the 5 GHz band of the AP.
68