Текст страницы
Parameter description
Parameter
Description
It specifies the deployment mode supported by the AP.
Local (default): It indicates that the AP can be managed only through the AC
Deployment Mode
connected to the same local network.
Cloud: In this mode, the AP can be managed only by a cloud AC or a cloud server.
It specifies the device name of the AP.
You can customize the device name here, or on Internet Settings > LAN Setup page.
Device Name
Modification of the device name is globally applied.
For later convenient management, you are recommended to customize the device
name.
Cloud AC Address
It specifies the WAN IP address of the router to which the cloud AC connects, or the
domain name to which the router’s WAN IP address is bound.
Cloud AC
Management Port
It specifies port of the egress router to which the cloud AC connects for managing this
device.
Cloud AC Upgrade
Port
It specifies port of the egress router to which the cloud AC connects for upgrading this
device.
6.1.3 Configuring the cloud deployment mode
Procedure
Step 1 Click Deployment, and select Cloud.
Step 2 Set related parameters.
Step 3 Click Save to apply your settings.
---- End
75