Текст страницы
3.2.2 Getting familiar with Client+AP mode configuration page
To enter the configuration page, set Working Mode to Client+AP. See the following figure.
Parameter description
Parameter
Description
Radio Band
It is used to select the radio band for configurations.
It specifies the working modes supported by the device.
AP mode (default mode): This mode is used to deploy wireless networks by
connecting the AP to the internet in a wired manner.
Working Mode
Client+AP mode: This mode is used to extend the existing wireless network by
bridging the upstream wireless signals.
SSID
It specifies the wireless network name of the upstream wireless network you selected.
It specifies the security mode adopted by the upstream wireless network you selected.
Security Mode
See Security Mode for details.
Key
It specifies the WiFi password for the upstream wireless network you selected.
Refresh
Used to refresh the scan results.
Scan: Used to scan nearby available wireless networks. The scan results are
displayed on the lower page.
Scan/Disable
Disable: The button only appears after you clicked Scan. It is used to end the scan
operation and collapse the scan result.
16