Текст страницы
3.1.2 Getting familiar with AP mode configuration page
To access the configuration page, choose Quick Setup.
Parameter description
Parameter
Description
Radio Band
It is used to select the radio band for configurations.
It specifies the working modes supported by the device.
AP mode (default mode): This mode is used to deploy wireless networks by
connecting the AP to the internet in a wired manner.
Working Mode
Client+AP mode: This mode is used to extend the existing wireless network by
bridging the upstream wireless signals.
Primary Wireless network name of the AP.
SSID
The 1st SSID on each radio band indicates the primary SSID.
It specifies the security mode you set for your AP’s WiFi network, including None, WEP,
WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK, WPA and WPA2.
Security Mode
See Security Mode for details.
3.1.3 Configuring AP mode
Log in to the web UI of the AP, and choose Quick Setup to enter the configuration page first.
13