Инструкция точка доступа Tenda i24

Procedure

Step 1 Configure the AP.

Assume that the administrator name is Tom, read community is Tom, and read/write
community is Tom123.

Log in to the web UI of the AP and choose SNMP.
1.

Set SNMP Agent to Enable.
2.

Set the SNMP parameters.
3.

Click Save to apply your settings.
4.

Step 2 Configure the NMS.

On an NMS that uses SNMP V1 or SNMP V2C, set the read community to Tom and
read/write community to Tom123. For details about how to configure the NMS, refer to the
user guide of the NMS.

---- End

Verification

After the configuration, the NMS can connect to the SNMP agent of the AP and can query and set
some parameters on the SNMP agent through the MIB.

80