Инструкция точка доступа Tenda i24

3.2.3 Configuring Client+AP mode

Log in to the web UI of the AP, and choose Quick Setup to enter the configuration page first.


By default, the device works in AP mode.


The following introduces how to set the device into Client+AP mode on 2.4 GHz band.
Configuration on 5 GHz is identical.


This device does not support dual-band bridging in Client+AP mode. Enabling Client+AP mode on
2.4 GHz band clears Client+AP configuration (if any) on 5 GHz band. And vice versa.

Procedure

Step 1 Select 2.4 GHz from the Radio Band drop-down list menu.

Step 2 Set Working Mode to Client+AP.

Step 3 Click Scan. The nearby available radio signals appear on the lower page.

If the SSID for bridging is not displayed, check if your upstream wireless network is enabled. If not,
enable it. Then refresh the scan result.

Step 4 Select the WiFi network to bridge, which is Tenda_Router in this example.

The device detects and auto-fills SSID, Security Mode, Encryption, and Algorithm of the
upstream wireless network for you, except the Key, which requires you to enter manually.

Step 5 Click Save to apply your settings.

17