Инструкция точка доступа Tenda i24

6.2.2 Configuring the SNMP function

To enter the configuration page, choose Advanced > SNMP first.

Procedure

Step 1 Enable SNMP Agent.

Step 2 Set related parameters.

Step 3 Click Save to apply your settings.

---- End

Parameter description

Parameter
Description

It specifies whether to enable the SNMP agent function of the AP. By default, it is
disabled.

SNMP Agent

An SNMP manager and the SNMP agent can communicate with each other only when
their SNMP versions are the same. Currently, the SNMP agent function of the AP
supports SNMP V1 and SNMP V2C.

Administrator
It specifies the administrator’s name of the AP. The default name is Administrator. You
can modify the administrator’s name if required.

It specifies the device name of the AP. By default, the device name is Access Point. You
can modify it if required.

Device Name

You are recommended to modify the AP name so that you can identify your AP easily
when managing the AP using SNMP.

Location
It specifies the location where the AP is used. You can modify the location according to

78