Текст страницы
Parameter
Description
It specifies the VLAN IDs corresponding to SSIDs. By default, this value is 1000.
VLAN ID
After the QVLAN function is enabled, the wireless ports corresponding to SSIDs
functions as access ports. The PVID of an access port is the same as its VLAN ID.
If the QVLAN function is enabled, tagged data received by a port of the AP is forwarded to the other
ports of the VLAN corresponding to the VID in the data, whereas untagged data received by a port
of the AP is forwarded to the other ports of the VLAN corresponding to the PVID of the port that
receives the data.
The following table describes how ports of different link types process transmitted and received
data.
Method to process received data
Port
Method to process transmitted data
Tagged data
Untagged data
Access
Transmit data after removing tags from
the data.
If the VID and PVID of a port are the
same, transmit data after removing tags
from the data.
Trunk
Forward the data to
other ports of the VLAN
corresponding to the
VID in the data.
Forward the data to the
other ports of the VLAN
corresponding to the PVID
of the port that receives
the data.
If the VID and PVID of a port are
different, transmit data without
removing tags from the data.
5.8.2 Example of configuring QVLAN
Networking requirement
A hotel has the following WiFi network coverage requirements:
Guests are allowed to connect to VLAN2 and only able to access the internet.
Hotel staffs are allowed to connect to VLAN3 and only able to access the intranet.
Hotel administrators are allowed to connect to VLAN4, able to access both the intranet and the
internet.
Assume that the SSID for guests is internet, the SSID for staffs is oa and the SSID for administrators
is VIP. The SSIDs are enabled and configured successfully on the AP.
69