Инструкция точка доступа Tenda i24

5.1.3 Example of configuring a WiFi network encrypted by WPA or WPA2

 Network topology

Internet

Router

PoE switch

RADIUS server
IP: 192.168.0.200

AP
IP: 192.168.0.254
SSID: hot_spot

Configuration description

Configuring a WiFi network encrypted by WPA or WPA2 involves operations across various devices.
This guide will walk you through the configuration step by step.

The following table summarizes the overall steps. Get yourself familiar with the whole process
before you start.

Step
Task
Description

1
Configure the AP.

Select the SSID you want to implement the RADIUS authentication, and
enable it. Modify the SSID as required. Then set the security mode to
WPA2 and enter the RADISU server-related parameters.

2
Create RADIUS client.
Create a RADIUS client first, and then create a remote access policy.

3

Add the wireless network enabled with WPA or WPA2 of the AP
manually, and configure its security settings.

Configure wireless network
information on the wireless
client.

33