Текст страницы
Parameter description
Parameter
Description
MAC Address
It specifies the MAC address of the AP’s LAN port.
It specifies IP address obtaining method of the AP.
Static IP (default): You are required to set related parameters manually.
IP Address Type
DHCP (Dynamic IP Address): The AP automatically obtains related parameters from
a DHCP server on your LAN network.
IP Address
It specifies the LAN IP address (also the login IP address) of the AP. Default:
192.168.0.254.
Subnet Mask
It specifies the subnet mask of the AP. Default: 255.255.255.0.
It specifies the gateway IP address of the AP.
Default Gateway
Generally, enter the LAN IP address of the router which has internet accessibility into
this box.
It specifies the IP address of the primary DNS server of the AP.
Primary DNS
If DNS proxy function is supported on your router connected to the internet, you can
set the IP address of the primary DNS server to the LAN IP address of your router.
Otherwise, enter a correct DNS server IP address.
Secondary DNS
It specifies the IP address of the secondary DNS server of the AP. This parameter is
optional.
It specifies the name of the AP.
Device Name
For later convenient management, you are recommended to modify each AP’s name.
Faster Speed (Auto Negotiation): This option features a high data rate but short
transmission distance. Generally, we recommend you select this option.
Longer Distance (10 Mbps Half Duplex): This option features long transmission
distance but low data rate. Generally, the negotiated speed is 10 Mbps.
Optimize Ethernet
for
If the Ethernet cable connecting the Ethernet port of the AP to the peer device is longer
than 100 meters, the Longer Distance mode is recommended. In this case, ensure that
the peer device adopts auto negotiation option.
20