Текст страницы
Printing
[Password to Open Document]
When printing a password-protected PDF file, enter the password to open the file.
[Other]
Configure and adjust image quality settings and other detailed print settings.
[Halftones]
Set the printing method when reproducing halftones (the intermediate range between the lighter and darker
areas of an image). For details about the settings, see the following:
[Halftones](P. 348)
[Pure Black Text]
Specify whether to print black text using 1-color black (K) toner.
If you specify [Off] in this setting, documents are printed according to the settings in [Output Profile].
* This applies to black text where the color information is as follows:
●R = G = B = 0%
●C = M = Y = 100%
●C = M = Y = 0%, K = 100%
[Pure Black Graphics]
Set whether to print black graphics (illustrations created in applications) using only the black (K) toner.
When you select [Off], printing is performed according to the [Output Profile] setting.
* This setting applies to black graphics with the following color information:
●R = G = B = 0%
●C = M = Y = 100%
●C = M = Y = 0%, K = 100%
[Black Overprint]
Specify whether overprinting (printing colors on top of each other) is used when black text appears on a color
background or is overlaid on a figure. For details about the settings, see the following:
[Black Overprint](P. 362)
[RGB Source Profile]
Select the appropriate profile according to the monitor you are using when printing RGB data. For details about
the settings, see the following:
[RGB Source Profile](P. 362)
[CMYK Simulation Profile]
Select the simulation target when printing CMYK data. The machine converts CMYK data to a device-dependent
CMYK color model based on this simulation. For details about the settings, see the following:
[CMYK Simulation Profile](P. 362)
[Use Grayscale Profile]
Specify whether to convert gray data to CMYK data using the grayscale profile of the machine.
* Even if [On] is selected, data is printed using 1-color black (K) toner, depending on the setting of [Output
Profile], [Pure Black Text] or [Pure Black Graphics].
[Output Profile]
Select the appropriate profile for the print data. For details about the settings, see the following:
[Output Profile](P. 363)
[Matching Method]
Select the element to be prioritized when adjusting the color with [RGB Source Profile]. For details about the
settings, see the following:
[Matching Method](P. 364)
[Composite Overprint]
Specify whether to overprint CMYK data set for overprinting, as composite output.
Specifying [Off] in this setting prints the image as if overprinting were not specified.
* Overprinting with special colors is not used, even if [On] is specified here.
159