Текст страницы
Settings Menu Items
[Special Processing]
C0JS-076
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its
condition.
* Values in bold red text are the default settings for each item.
[Auto Detect B&W/Color Original](P. 327)
[Reduce Faint Print After Replacing Cart.]
(P. 327)
[Special Paper Processing](P. 323)
[Reduce Paper Sticking at Output](P. 325)
[High Humidity Mode](P. 325)
[Low Humidity Mode](P. 325)
[Reduce Ghosting 2](P. 325)
[Reduce Condensation (Consec. 2-Sd Print)]
(P. 325)
[Correct Paper Conveyance](P. 327)
[Correct Void](P. 328)
[Prevent Black & White Printing Noise]
(P. 328)
[Correct Void for Rough Paper](P. 328)
[Correct Void for Consecutive Printing]
(P. 328)
[Correct Uneven Printing](P. 326)
[Prevent Fogging](P. 326)
[Reduce Formation of Waterdrop Pattern](P. 326)
[Reduce Drum Streak](P. 326)
[Reduce Toner Flaking](P. 327)
[ITB Cleaning Frequency](P. 328)
[Reduce Paper Wrap During Fixing](P. 329)
[Special Paper Processing]
[Menu]
[Adjustment/Maintenance]
[Adjust Image Quality]
[Special Processing]
Specify special processing for the paper in the following situations:
●If you are using special paper
- To print on the back of printed paper
- For paper with a rough surface
●If the envelope flap is stuck down
●If the paper creases or wrinkles when printed
●If the paper curls during printing
[Manual Back Side Print (2-Sided Only)]
[Menu]
[Adjustment/Maintenance]
[Adjust Image Quality]
[Special Processing]
[Special Paper
Processing]
If you are using paper that has already been printed on, printing on the back side may appear faint. If so,
specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending
on the operating environment humidity, changes in image quality or paper jams may occur.
[Multi-Purpose Tray]
[Off]
[On]
[Drawer 1]
[Off]
[On]
323