Текст страницы
Setting Up
Connecting to a Wireless LAN by Using the Router Button (Push Button Mode)
C0JS-015
If your wireless LAN router supports WPS push button mode, you can easily set up a connection simply by using the
control panel of the machine and the button on the wireless LAN router.
Administrator privileges are required to connect to a wireless LAN.
.
1 On the control panel, select [Wi-Fi Settings] in the [Home] screen and press
[Home] Screen(P. 91)
➠The [Select Network] screen is displayed.
●If the login screen appears, enter the Administrator ID and PIN, and then press
.
Administrator ID
and PIN(P. 4)
●If the message [Do you want to enable Wi-Fi?] appears, select [Yes] and press
.
●If the message [Cannot find the access point.] appears, press
.
.
2 Select [Other Connections] and press
.
3 Select [WPS Push Button Mode] and press
➠The machine starts searching for an access point.
4 After the search for an access point starts, press the button on the wireless LAN
router within two minutes.
Press the button within two minutes. (Depending on the wireless LAN router, you may have to press and hold
the button.)
* For details on how to operate the button, see the manual of your wireless LAN router.
.
5 When [Connected.] appears on the control panel, press
] appears on the [Home] screen.
➠When the machine is connected to the wireless LAN, [
6 Wait a few minutes.
➠By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 55)
Setting IPv6 Addresses(P. 57)
If an Error Message Appears during Operation and a Connection Cannot Be Established
●Press
, and repeat the procedure starting from Step 2.
48