Текст страницы
Maintenance
Maintenance
C0JS-08A
To ensure safe and convenient use of the machine, daily maintenance that includes cleaning and replacement of
consumables is required.
If you notice a deterioration in the print quality or frequent paper jams, perform cleaning and adjustment to improve
it.
Performing Maintenance Operations
In addition to performing regular maintenance, operations are required according to the machine status and
print quality.
Cleaning
Regularly clean the various parts of the machine. If the paper becomes dirty, or the print quality has
deteriorated, clean the parts causing the problem according to the symptoms.
Cleaning the Machine(P. 407)
Replacing Consumables
If a message about consumables appears on the screen of the control panel or Remote UI, or the print
quality deteriorates, replace the consumables.
Replacing Consumables(P. 411)
Adjusting the Print Quality and Position
If the printed color is not reproduced properly, the image position is shifted, or the print results are
otherwise not as expected, adjust the print quality and position according to the symptoms that occur.
Adjusting the Print Quality and Position(P. 424)
Changing the Installation Location
When moving the machine, perform the prescribed procedure to prevent accident or damage.
Moving the Machine(P. 429)
Maintenance and Inspections
●The minimum holding period for performance parts for repairs and toner cartridges is seven (7) years after
production of the machine model is discontinued.
●If a problem occurs during operation, see the following:
Troubleshooting(P. 433)
If the problem still cannot be resolved or you think the machine needs to be checked, contact your dealer or
service representative.
If the Problem Persists(P. 507)
Installation
●If you find the machine's operation to be noisy in some operating modes or due to your surroundings, we
recommend setting up the machine in a separate location from your office.
●Water droplets (condensation) may form inside the machine if the room where the machine is installed is
heated rapidly, or if the machine is moved from a cool, dry location to a warm, humid location. Using the
machine under these conditions may result in problems such as paper jams, poor print quality, or faults. Let
the machine adjust to the ambient temperature and humidity for at least two hours before use.
●The machine may not operate properly when used at high altitudes (of 3,000 meters or more above sea
level).
◼See Also
Checking the Required Troubleshooting Solutions from the Symptoms
405