Текст страницы
Linking with Mobile Devices and Integrating with a Cloud Service
To allow mobile devices to always connect to the machine, in [Access Point Mode Settings], specify the SSID
and network key, and select the [Always Keep Enabled If SSID/Network Key Is Specified] checkbox in [Keep
Connection Enabled].
●If this function is enabled, the settings of [Terminate Direct Connection Session] are disabled.
●If this function is enabled, the machine does not fully enter Sleep Mode.
6 Click [OK].
7 Restart the machine. Restarting the Machine(P. 84)
➠The settings are applied.
Checking the Network Connection Method of the Machine
If the machine is not connected to a network (wired or wireless LAN), check that the network connection method is set
to wired LAN.
If the machine is connected to a network, you do not have to check this.
on the control panel.
Control Panel(P. 11)
1 Press
➠The [Status Monitor] screen is displayed.
[Network Connection Method]
.
2 Press [Network Information]
➠The [Network Conn. Method] screen is displayed.
3 Check that [Wired LAN] is displayed.
If the connection type is set to wired LAN, you can establish a direct connection even if the machine is not
connected to a network.
When [Wi-Fi] Is Displayed in [Network Conn. Method]
When the machine is not connected to a wireless LAN, a direct connection cannot be established. Connect
the machine to a wireless LAN or switch the connection type to wired LAN.
Connecting to a Wireless LAN(P. 46)
Selecting Wired or Wireless LAN(P. 44)
172